Shop

/ Shop

Showing 1–16 of 310 results

  • #10 AN Steel Braid Hose

    $7.00

    Compatible with synthetic lubricants, fuel, alcohol/methanol, coolant, and oil, this braided hose was developed to meet strict racing specifications. Features: High-tensile stainless steel outer shell resists high pressure, temperature, & abrasion Stainless steel inner braid Seamless nitrile inner tube Lengths: 3′, 6′, 10′, 15′, 20′ Accepted by the NHRA Not for use with brake fluid…

  • #6 AN Steel braid hose

    $4.50

    Compatible with synthetic lubricants, fuel, alcohol/methanol, coolant, and oil, this braided hose was developed to meet strict racing specifications. Features: High-tensile stainless steel outer shell resists high pressure, temperature, & abrasion Stainless steel inner braid Seamless nitrile inner tube Lengths: 3′, 6′, 10′, 15′, 20′ Accepted by the NHRA Not for use with brake fluid…

  • #8 AN Steel Braid Hose

    $5.50

    Compatible with synthetic lubricants, fuel, alcohol/methanol, coolant, and oil, this braided hose was developed to meet strict racing specifications. Features: High-tensile stainless steel outer shell resists high pressure, temperature, & abrasion Stainless steel inner braid Seamless nitrile inner tube Lengths: 3′, 6′, 10′, 15′, 20′ Accepted by the NHRA Not for use with brake fluid…

  • 10 AN Hose End 90 Degree

    $13.00

    90 Degree AN Swivel-Seal Hose End Fittings Stainless Retention Pins Allows 360+ Adjustment Dual Plane Anti-Seepage Seal Precision Machined Excellent Fuel Flow Capacity Trouble Free Performance Nipple and Cutter Design Aerospace Proven

  • 10 AN Hose End Straight

    $9.00

    Straight AN Swivel-Seal Hose End Fittings Stainless Retention Pins Allows 360+ Adjustment Dual Plane Anti-Seepage Seal Precision Machined Excellent Fuel Flow Capacity Trouble Free Performance Nipple and Cutter Design Aerospace Proven

  • 10″ H.P Reversible Electric Cooling Fan

    $24.95

    This is a 10 Inch,12 Volt, 8 Blade, High Performance Reversible Electric Cooling Fan Kit. This fan has Eight blades. Includes fan and four mounting brackets. This fan is configured as a puller from the factory; it mounts on the inside and pulls the air through the radiator. However, the polarity of the wiring & blades can be…

  • 1000 Cfm 4 Barrel 4150 Billet Throttle Body

    $210.00

    Throttle Body Style: Multi-port injection, MPI Airflow Rate (cfm):1000 cfm Venturi Quantity: 4 TPS Sensor Included: No IAC Motor Included: No Gaskets Included: No Hardware Included: No Injectors Included: No Throttle Body Material: Billet aluminum Throttle Body Finish: Natural This new  Throttle Body is designed to produce smooth, stable air flow at any rpm. The…

  • 1000 Lbs./Hr. Inline Universal EFI Fuel Pump-BLACK

    $185.00

    BLACK PUMP ONLY  COLOR AVAILABLE Feed your beast with these new EFI fuel pumps. Beautiful, compact, durable, and reliable, these fuel pumps will fuel the fire whether it’s naturally aspirated, nitrous enhanced, blown, or turbocharged. These pumps are for fuel-injected applications with base pressure settings between 30 & 65 psi. Supported Naturally Aspirated Engines: 2200HP…

  • 101mm EFI Throttle Body Race Elbow 4500 Carb Flange for LS2 Series 4 Bolt

    $100.00

    Intake Elbow Type: 90 Degree Elbow Throttle Body Bore Size: 101mm Intake Elbow Height: 5.750 in. Aluminum Finish: Natural .This unit will adapt a 4 bolt LS 2 Series throttle body to a carburetor manifold with a 4500 carb flange. These elbows are designed for use in high horsepower extreme race applications. An internal divider…

  • 1050 CFM Full Billet 4500 Carburetor

    $1,025.00

    Fuel Type: Gasoline Carburetor Flange:   4500 Flange             Choke:      None Secondary Type:     Mechanical           CFM:    1050             Fuel Inlet:     Dual  Carburetor Finish: Tumble polished & Chrome       Ford Kickdown:   No Throttle Linkage Type:…

  • 12″ H.P Reversible Electric Cooling Fan

    $27.95

    This is 12 Inch,12 Volt High Performance Reversible Electric Cooling Fan Kit. This fan has ten blades, and is only 2-5/8 inches deep. Includes fan and four mounting brackets. This fan is configured as a puller from the factory and is mounted on the inside to pull air through the radiator. The wiring & blades…

  • 1200 Cfm 4 Barrel 4150 Billet Throttle Body

    $220.00

    Throttle Body Style: Multi-port injection, MPI Airflow Rate (cfm): 1200 cfm Venturi Quantity: 4 TPS Sensor Included: No IAC Motor Included: No Gaskets Included: No Hardware Included: No Injectors Included: No Throttle Body Material: Billet aluminum Throttle Body Finish: Natural This new Throttle Body is designed to produce smooth, stable air flow at any rpm….

  • 14″ H.P Reversible Electric Cooling Fan

    $32.95

    This is a 14 Inch,12 Volt, 8 Blade, High Performance Reversible Electric Cooling Fan Kit. This fan has Eight blades. Includes fan and four mounting brackets. This fan is configured as a puller from the factory; it mounts on the inside and pulls the air through the radiator. However, the polarity of the wiring & blades can be…

  • 16″ H.P Reversible Electric Cooling Fan

    $39.95

    This is a 16 Inch,12 Volt High Performance Reversible Electric Cooling Fan Kit. This fan has ten blades. Includes fan and four mounting brackets. This fan is configured as a puller from the factory; it mounts on the inside and pulls the air through the radiator. However, the polarity of the wiring & blades can be…

  • 180 lbs./in. Spring Rate 12″ Coil Over Shock Adj (Pair)

    $235.00

    Coil-Over Kit Position: Rear Shocks Included: Yes Adjustable Valving: No Internal Design: Twin-tube Gas Charged: No Number of Valving Selections: n/a, Extended Length (in): 13.840 in. Collapsed Length (in): 10.000 in. Upper Mount: Eyelet(5/8″) Lower Mount: Eyelet(5/8″) Shock Body Material: Aluminum,  Shock Body Finish: Natural, Bushing Material: Steel,  Rod end Bushing Color: Natural Coil-Over Springs…

  • 2” Aluminum 4150 CNC Machined Carb spacer

    $55.00

    Carburetor Spacer Style: Tapered combo spacer Thickness (in): 2.000 in. Carburetor Spacer Material: Aluminum Carburetor Spacer Finish: Clear anodized Gaskets Included: No Mounting Hardware Included: No Quantity: Sold individually. Notes: Combination 4-hole and open plenum. Individually milled from super durable 6061 T6 aluminum billets, these CNC machined carburetor spacers can handle anything your vehicle can…

End of content

End of content