351C Cleveland Hyd FT Cylinder Head Top End Engine Combo Kit

Description

351C Cleveland Hyd FT Cylinder Head Top End Engine Combo Kit

Intake Manifold Included: Yes, Fuel Delivery Style: Carbureted, Intake Material: Aluminum
Intake Finish: Natural, Intake Style: Single plane, Intake Basic RPM Range: 1,500-7,000
Intake Manifold Model: Eliminator Series Single Plane, Gaskets Included: Yes
Cylinder Head Style: Assembled, Cylinder Head Material: Aluminum, Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 64 cc, CNC-Machined Combustion Chamber: No
Intake Runner Volume (cc): 220 cc, Intake Port Shape: Rectangular, Intake Port Location:Standard 3V (4v with tongues), Exhaust Port Shape: Rectangular, Exhaust Port Location: Raised,
Comp. Valve Job: No, Intake Valves Included: Yes, Intake Valve Diameter (in): 2.190 in.
Exhaust Valves Included: Yes, Exhaust Valve Diameter (in): 1.710 in.
Valve Springs Included: Yes, Outside Diameter of Outer Spring (in): 1.450 in.
Damper Spring Included: Yes, Number of Springs Per Valve: Dual, Retainers Included: Yes
Retainer Material: Chromoly steel, Locks Included: Yes, Lock Style: 10 degree
Valve Stem Seals Included: Yes, Valve Stem Seal Style: Positive stop
Rocker Arms Included: Yes, Rocker Arm Studs Included: Yes, Rocker Arm Nuts Included: Yes
Rocker Arm Nut Thread Size: 7/16 in., Guideplates Included: Yes, Guideplate Pushrod Size: 5/16 in.
Valve Covers Included: Yes, Valve Cover Material: Cast aluminum, Valve Cover Finish: Polished
Valve Cover Mounting Style: Perimeter bolt, Accessory Bolt Holes Drilled: Yes
Valve Guides Included: Yes, Valve Guide Material: Bronze, Valve Seats Machined: Yes
Valve Seat Machine Style: 3-angle, Valve Seat Material: Ductile iron
Steam Holes Drilled: No, Oiling Style: Through pushrod, Machined for O-Ring: No, Heat Crossover: No
Cylinder Head Bolts Included: No

Kits include:
Fully assembled cylinder heads…Intake manifold… Intake manifold gaskets…Valve covers…Roller rockers…Guideplates…Screw in studs.
Assembly Specifications:
Max Lift: .600..Coil Bind: .740…Intake Install: 130lbs @ 1.8…Exhaust Install: 130lbs @ 1.8
Closed Sear Pressure: 110lbs…Open Seat Pressure: 300lbs
Intake Manifold Information:
These 360 degree single plane manifolds make their power in the 1,500 to 7,000 rpm range, which makes them the ultimate manifolds for high-performance street, drag, marine, and Oval Track engines. The carburetor mounting pad is designed to accept all current aftermarket performance carburetors, and includes an open-style plenum for increased flow. Best suited to engines equipped with aggressive camshafts, headers, and high-output ignitions, these intakes are sure to put a smile on your face.
Intake Manifold Gasket Information:
PCE intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol, while allowing engine builders to precision-trim around the intake ports.

Cylinder Heads Suggested Parts (NOT included):
Head Gaskets:
The heads use the following head gaskets for use with 351C block:
PCE PCE348.1005 (MLS 4.055_ gasket bore) or Fel-Pro 1013 (Composite 4.100_ gasket bore)
Both gaskets are .040_ thickness when compressed.

Spark Plugs:
Our Ford Cleveland cylinder heads require the use of a 14mm. thread 5/8_ hex, .750_ reach spark plugs.Below you will find a list of some plugs that fit and work with our heads:

NGK – BCPR6ES, R5671A-7, R5671A-8
Autolite – 3923, 3924, AR3933, AR3934
Champion – RC12YC, RC10YC4, RC9YC3
Remember that you need a COLDER plug when you make more power, ie. N2O, Turbo and supercharging.

Head Studs:
The PCE Cleveland 3v heads require specific head studs that are longer than standard. Use PCE PCE279.1014. These studs should only be finger tightened into the block. Torque the nuts to 65lbs. using high pressure moly lube, in increments of 15lbs.
Intake / Exhaust Gaskets:
Due to the unique raised port of the PCE 3v head, the only intake gaskets readily available are PCE SM3282 which measure 1.73(W) x 2.140(T) with the floor of the port 1.220_ up from the deck of the head. The exhaust side of the head uses standard 4v exhaust gaskets. You can use PCE SM3274 or Fel-Pro 1416 header gaskets which measure 1.89_ (W) x 2.19_ (T).